|
Warning: this is an htmlized version!
The original is here, and the conversion rules are here. |
#######
#
# E-scripts on modem/fax stuff.
#
# Note 1: use the eev command (defined in eev.el) and the
# ee alias (in my .zshrc) to execute parts of this file.
# Executing this file as a whole makes no sense.
# An introduction to eev can be found here:
#
# (find-eev-quick-intro)
# http://angg.twu.net/eev-intros/find-eev-quick-intro.html
#
# Note 2: be VERY careful and make sure you understand what
# you're doing.
#
# Note 3: If you use a shell other than zsh things like |&
# and the for loops may not work.
#
# Note 4: I always run as root.
#
# Note 5: some parts are too old and don't work anymore. Some
# never worked.
#
# Note 6: the definitions for the find-xxxfile commands are on my
# .emacs.
#
# Note 7: if you see a strange command check my .zshrc -- it may
# be defined there as a function or an alias.
#
# Note 8: the sections without dates are always older than the
# sections with dates.
#
# This file is at <http://angg.twu.net/e/modem.e>
# or at <http://angg.twu.net/e/modem.e.html>.
# See also <http://angg.twu.net/emacs.html>,
# <http://angg.twu.net/.emacs[.html]>,
# <http://angg.twu.net/.zshrc[.html]>,
# <http://angg.twu.net/escripts.html>,
# and <http://angg.twu.net/>.
#
#######
# «.modem_port_and_irq» (to "modem_port_and_irq")
# «.basic_modem» (to "basic_modem")
# «.modem_interact» (to "modem_interact")
# «.modem_tty_bits» (to "modem_tty_bits")
# «.minicom-src» (to "minicom-src")
# «.expect_isp» (to "expect_isp")
# «.expect_isp_2» (to "expect_isp_2")
# «.motorola_56k» (to "motorola_56k")
# «.wvdial» (to "wvdial")
# «.efax» (to "efax")
# «.ppp-inx-feb2003» (to "ppp-inx-feb2003")
# «.stickybit» (to "stickybit")
# «.pppoe» (to "pppoe")
# «.pppoeconf» (to "pppoeconf")
# «.serial-usb» (to "serial-usb")
#####
#
# locating the modem port and IRQ
# 2000jan03
#
#####
# «modem_port_and_irq» (to ".modem_port_and_irq")
#*
# Active "ttySxx" ports:
dmesg | grep ttyS
#*
# Disable gpm, for machines where the mouse is so badly configured
# that gpm interferes with the modem:
ps ax | grep gpm | grep -v grep
kill $(pidof gpm)
ps ax | grep gpm | grep -v grep
#regpm
#*
# To test the port run this block.
# You'll need to type several "M-l"s.
# (to "modem_interact")
cat > $EEG <<'---'
atz
~
---
modem_interact /dev/ttyS0 20 eeg
modem_interact /dev/ttyS1 20 eeg
modem_interact /dev/ttyS2 20 eeg
modem_interact /dev/ttyS3 20 eeg
#*
# Set the symlink.
cd /dev/
laf modem
ln -sf ttyS2 modem
laf modem
#*
# (find-fline "/etc/minirc.dfl")
# To set the minicom port to /dev/modem:
minicom -s
# and, using the menus:
# Serial port setup
# A -> Serial device (set it to /dev/modem)
# Save setup as dfl
# Exit from minicom
#*
#####
#
# Basic modem scripts
# 2001jan03
#
#####
# «basic_modem» (to ".basic_modem")
# (to "modem_interact")
#*
cat > $EEG <<'---'
atz
at$
ati3
ati7
ati9
atd$
~
---
modem_interact '' '' eeg
#*
#####
#
# Connecting patna to angg via ppp
# 99aug??
#
#####
# «patna_to_angg»
# (find-fline "~/EXPECT/modem.002")
# O que recebe (angg):
#
cp -v ~/.zshrc /patna/home/root/
cp -dpvR ~/EXPECT/modem.002 /patna/home/root/EXPECT/
#
modem.002 : mint 'ATZ' 'ATL3&A3&H1&R2X3' 'ATS0=1' 'ATS1=0' : mint \
&& echo PPP server... \
&& /usr/sbin/pppd 10.0.2.1:10.0.2.2 crtscts modem \
< /dev/modem > /dev/modem
# O que disca (patna):
#
modem.002 : mint 'ATZ' 'ATL3&A3&B1&H1&R2X3' 'ATS0=0' \
: 'set timeout 50' 'ATDT//2863160' : mint \
&& echo PPP client... \
&& /usr/sbin/pppd defaultroute noipdefault crtscts modem \
< /dev/modem > /dev/modem
# (find-fline "/var/log/")
# (find-fline "/var/log/syslog")
# (find-fline "/patna/var/log/")
# (find-fline "/patna/var/log/syslog")
# (find-fline "/patna/etc/hosts")
# Tirei os "-detach"es. Não fez diferença...
As instruções são meio longas... o cara tem que ter ppp/options sem o
auth, tem que ter um sistema telneteável (onde é que setei isso?) tem
que ter /modem e o modem num estado razoável, além de ter o expect; é
bom que
ATL3&A3&B1&H1&R2&S0=0X3
Ln n=0 Low Speaker Volume
n=1 Low Speaker Volumee
n=2 Med Speaker Volumee
n=3 Hi Speaker Volumee
&An n=0 Disable /ARQ Result Codes
n=1 Enable /ARQ Result Codes
n=2 Enable /Modulation Codes
n=3 Enable /Extra Result Codes
&Bn n=0 Floating DTE Speed
n=1 Fixed DTE Speed
n=2 DTE Speed Fixed When ARQ
&Hn n=0 Disable TX Flow Control
n=1 CTS
n=2 Xon/Xoff
n=3 CTS and Xon/Xoff
&Rn n=1 Ignore RTS
n=2 RX to DTE/RTS high
S0 Ring to Answer ON
Xn n=0 Basic Result Codes
n=1 Extended Result Codes
n=2-4 Advanced Result Codes
# run minicom and...
(stty < /dev/modem
stty -a < /dev/modem
) |& tee ~/o
[-]raw Same as
-ignbrk -brkint -ignpar -parmrk -inpck
-istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc
-ixany -imaxbel -opost -isig -icanon -xcase min 1
time 0
#####
#
# dip source (old!)
#
#####
apti liblockdev0g-dev
# (find-vldifile "liblockdev0g-dev.list")
# (find-fline "/usr/doc/liblockdev0g-dev/")
# (find-fline "/usr/include/lockdev.h")
# (code-c-d "dip" "/usr/src/dip-3.3.7p/")
rm -Rv /usr/src/dip-3.3.7p/
pdsc /big/slinks2/dists/slink/main/source/net/dip_3.3.7p-2.dsc
cd /usr/src/dip-3.3.7p/
debian/rules CC="gcc -g" |& tee odrb
# (gdb "gdb /usr/src/dip-3.3.7p/dip")
# (find-dipfile "")
# (find-dipfile "modem.c")
# (find-dipfile "tty.c")
# (find-dipfile "debian/rules")
# (find-dipfile "Makefile")
######
#
# chat
#
######
# (find-k2file "drivers/net/dummy.c")
setserial /dev/ttyS2 irq 5 uart 16550A
insmod slhc
insmod ppp
ifconfig dummy down
cat > ~/.dunc/options <<'EOF'
defaultroute
crtscts
modem
proxyarp
EOF
# removed: -am -mru lock
cat > ~/.dunc/chatfile <<'EOF'
"" "ATL3&A3&B1&H1&R2&S0=0X3" OK atdt////512-6880 CONNECT "" rname:--rname: \qedrx ord: snobol78 ""
EOF
/usr/sbin/pppd -d -d -d file /home/root/.dunc/options \
connect "/usr/sbin/chat -v -t 60 -f /home/root/.dunc/chatfile" /dev/ttyS2 38400 &
tail -f /var/log/ppp.log
kill $(ps ax | grep pppd | awk '{print $1}')
cd /var/log/
l ppp.log kern.log daemon.log
#####
#
# stuff
#
#####
# (find-fline "~/bin/inx.dip")
# (find-fline "~/bin/inx-up")
# (find-fline "~/bin/novanet.dip")
# (find-fline "~/bin/novanet-up")
# (find-fline "/etc/resolv.conf")
# (find-fline "/var/log/")
# (find-fline "/etc/syslog.conf")
# (find-fline "/etc/syslog.conf")
ifconfig
route
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Internexus:
#
ppp0 Link encap:Point-to-Point Protocol
inet addr:200.240.18.26 P-t-P:200.240.18.4 Mask:255.255.255.255
UP POINTOPOINT RUNNING MTU:1500 Metric:1
RX packets:6 errors:1 dropped:1 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Memory:15d8038-15d8c04
#
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
arpoador.inx.co * 255.255.255.255 UH 0 0 0 ppp0
localnet * 255.0.0.0 U 0 0 3 lo
default arpoador.inx.co 0.0.0.0 UG 0 0 0 ppp0
Novanet:
#
ppp0 Link encap:Point-to-Point Protocol
inet addr:200.255.172.113 P-t-P:200.255.172.139 Mask:255.255.255.255
UP POINTOPOINT RUNNING MTU:1500 Metric:1
RX packets:21 errors:2 dropped:2 overruns:0 frame:0
TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Memory:298f038-298fc04
#
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
orion4.novanet. * 255.255.255.255 UH 0 0 0 ppp0
localnet * 255.0.0.0 U 0 0 3 lo
default orion4.novanet. 0.0.0.0 UG 0 0 1 ppp0
######
#
# pppd
#
######
pdsc /big/slinks1/dists/slink/main/source/base/ppp_2.3.5-2.dsc
pdsc /big/slinks2/dists/slink/main/source/net/dip_3.3.7p-2.dsc
# (code-c-d "ppp" "/usr/src/ppp-2.3.5/")
# (code-c-d "dip" "/usr/src/dip-3.3.7p/")
# (find-pppfile "")
# (find-dipfile "")
# (find-dipfile "ppp.c")
gcc -E ppp.c | tail -n 30 > do_ppp.E
# (find-dipfile "do_ppp.E")
Invoking PPPD with "debug -detach defaultroute noipdefault crtscts modem"
/usr/sbin/pppd pppd debug -detach defaultroute noipdefault crtscts modem debug
/usr/sbin/pppd pppd -detach defaultroute noipdefault crtscts modem
egrep "detach|defaultroute|ipdefault|crtscts|modem|debug" /etc/ppp/options
/usr/sbin/pppd -detach defaultroute noipdefault
# (find-fline "~/bin/inx.dip")
5406880
C-a O
<Modem and dialing>
<M - Dial time>
70
<A - Init string>
^MATL3&A3&B1&H1&R2&S0=0X3^M
C-a O
<Filenames and paths>
<E - Kermit program>
/usr/sbin/pppd -detach defaultroute noipdefault
C-a K # run kermit
#####
#
# etc
#
#####
xisp
# (find-vldifile "ppp.list")
# (find-fline "/usr/doc/ppp/")
# (find-fline "/etc/ppp/")
# (find-fline "/etc/ppp/options")
# (find-fline "/etc/chatscripts/")
# (find-fline "/etc/init.d/ppp")
apti doc-linux-text
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "Other Useful/Important Documents")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "9.3. Configuring your modem")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "(which looks like garbage)")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "ATHO")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "port specific option files")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" 2068)
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "26. Setting up a PPP server")
# (find-fline "/usr/doc/HOWTO/PPP-HOWTO.gz" "<local IP>:<remote IP>")
# (find-fline "/usr/doc/HOWTO/Serial-HOWTO.gz")
# (find-vldifile "doc-linux-html.list")
# (find-fline "/usr/doc/doc-linux-html/")
lynx /usr/doc/HOWTO/PPP-HOWTO.html
lynx http://summer.snu.ac.kr/~djshin/linux/mail-list/index.shtml
lynx http://www.in.net/info/modems/index.html
# (find-fline "/usr/doc/HOWTO/mini/SLIP-PPP-Emulator.gz")
# (find-vldifile "pppconfig.list")
# (find-fline "/usr/doc/pppconfig/")
# (find-fline "/usr/sbin/pppconfig")
apti doc-linux-fr
lynx /usr/doc/LANG/fr/HOWTO/mini/PPP-over-minicom.html
lynx /usr/doc/LANG/fr/HOWTO/mini/PPP-over-minicom-2.html#ss2.2
strace -q -f -o ~/osm minicom
#####
#
# modem_interact
# 2000jan03
#
#####
# «modem_interact» (to ".modem_interact")
# (find-angg ".zshrc" "modem_interact")
# (find-es "expect" "stty")
# (to "modem_tty_bits")
# (to "modem_interact")
#*
expect -c '
spawn -open [open /dev/modem r+]
stty speed 115200 < /dev/modem
stty -icanon
interact ~ return timeout 10 return
'
#*
# When the third parameter is "echo" the expect script is displayed
# instead of executed; if it is "eeg" then very interesting things
# happen.
# Note that you can also use this function to search for the mouse.
# (find-angg ".zshrc" "modem_interact")
# (to "basic_modem")
#
function modem_interact () {
$3 expect -c '
spawn -open [open '${1:-/dev/modem}' r+]
stty speed 115200 < '${1:-/dev/modem}'
stty -icanon
interact ~ return timeout '${2:--1}' return
'
}
# Just show how the parameters work:
# (find-es "bash" "var_expansion")
modem_interact /dev/ttyS2 5 echo
modem_interact '' '' echo
# Now interact with the modem (falling out after 5 seconds of inactivity).
modem_interact '' 5
# Done.
#*
#####
#
# modem tty bits (kernel defauls and minicom settings)
# 2001jan03
#
#####
# «modem_tty_bits» (to ".modem_tty_bits")
#*
# Here's a close-to-the-metal way to understand how minicom changes
# the tty bits of the modem: soon after booting,
stty -g < /dev/modem | tee ~/o1
(sleep 7; stty -g < /dev/modem > ~/o2) &
minicom
stty -g < /dev/modem | tee ~/o3
cat ~/o1 ~/o2 ~/o3 | tee ~/o
#*
# And here's what we get:
# o1 = 500:5:cbd:8a3b:3:1c:7f:15:4:0:1:0:11:13:1a:0:12:f:17:16:(16 times 0)
# o2 = 1:0:80001cb1:0:3:1c:7f:15:4:5:1:0:11:13:1a:0:12:f:17:16:(16 times 0)
# o3 = 1:0:800018b1:0:3:1c:7f:15:4:5:1:0:11:13:1a:0:12:f:17:16:(16 times 0)
expect -c '
puts [format "%o %o %o %o" 0x500 5 0xcbd 0x8a3b]
puts [format "%o %o %o %o" 1 0 0x80001cb1 0]
puts [format "%o" 0x80001c81]
'
# 0x500 5 0xcbd 0x8a3b -> 2400 5 6275 105073
# 1 0 0x80001cb1 0 -> 1 0 20000016261 0
# 0x80001c81 -> 20000016201
# (find-shutag "display_recoverable")
# (find-fline "/usr/include/bits/termios.h" "c_iflag bits")
# (find-fline "/usr/include/bits/termios.h" "c_oflag bits")
# (find-fline "/usr/include/bits/termios.h" "c_cflag bit ")
# (find-fline "/usr/include/bits/termios.h" "c_lflag bits")
# The kernel settings for c_{i,o,c,l}flags can be found at:
# (find-k22file "drivers/char/tty_io.c" "tty_std_termios.c_cflag =")
# tty_std_termios.c_iflag = ICRNL | IXON;
# tty_std_termios.c_oflag = OPOST | ONLCR;
# tty_std_termios.c_cflag = B38400 | CS8 | CREAD | HUPCL;
# tty_std_termios.c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
# ECHOCTL | ECHOKE | IEXTEN;
#
# These are the settings while minicom is running:
# c_iflag = IGNBRK;
# c_oflag = 0;
# c_cflag = CRTSCTS | B57600 | CLOCAL | HUPCL | CREAD | CS8;
# c_lflag = 0;
#
# When minicom ends c_cflag becomes (somewhat weirdly):
# c_cflag = CRTSCTS | B57600 | CLOCAL | HUPCL | CREAD | CS5;
#
# As for the c_cc chars, the kernel initializes them to:
# (find-k22file "include/asm-i386/termios.h" "intr=^C")
# The only c_cc changed by minicom is VTIME, that becomes 5 (=0.5s).
# Curiously, the kernel seems to have no interesting reference to
# VTIME; is libc in charge of all the hard work?
# (find-node "(libc)Low-Level Terminal Interface")
# (find-node "(libc)Canonical or Not")
# (find-node "(libc)Input Modes" "IGNBRK")
# (find-node "(libc)Output Modes")
# (find-node "(libc)Control Modes")
# (find-node "(libc)Local Modes")
# (find-node "(libc)Noncanonical Input" "how long to wait for input")
#####
#
# minicom source
# 2001jan03
#
#####
# «minicom-src» (to ".minicom-src")
# (find-status "minicom")
# (find-vldifile "minicom.list")
# (find-vldifile "minicom.list")
# (find-fline "/usr/doc/minicom/")
#*
pdsc $SDEBIAN/dists/potato/main/source/comm/minicom_1.82.1-1.dsc
cd /usr/src/minicom-1.82.1/
find * > .files
find * -name '*.[ch]' > .files.ch
etags $(<.files.ch)
debian/rules binary |& tee odrb
#*
cd /usr/src/minicom-1.82.1/
agrep -i 'leave without reset' $(<.files)
agrep -i NORESET $(<.files)
agrep -i CS5 $(<.files)
#*
# (code-c-d "minicom" "/usr/src/minicom-1.82.1/")
# (find-minicomfile "")
# (find-minicomfile "src/")
# (find-minicomfile "src/Makefile" "runscript:")
# (find-minicomfile "src/script.c")
# (find-minicomfile "src/minicom.c" "Leave without reset?")
# (find-minicomfile "src/minicom.c" "quit != NORESET")
# (find-k22file "include/linux/tty_driver.h")
#####
#
# An expect script to connect to an ISP
# 99dec04
#
#####
# (find-es "mail" "mauricio_99nov27")
# (find-fline "~/bin/inx.dip")
# (find-fline "~/bin/inx-up")
# «expect_isp» (to ".expect_isp")
cat > /etc/resolv.conf <<'---'
search .
nameserver 200.240.18.1
---
expect -c '
source $env(HOME)/.passwds.tcl
set phones {5406880 5126880 5126881 5126882 5126883 5126884 5126889
5126890 5126891 5126892 5126896 5126897 5126898 5126899 5126904
5126905 5126906}
spawn minicom
interact {
-re {~d([0-1][0-9])} {
set phone [lindex $phones $interact_out(1,string)]
send atdt//$phone\r
}
"~u" {send edrx\r}
"~p" {send $passwd(inx)\r}
"~\r" {send \001q\r}
-o rname: {send edrx\r}
ssword: {send $passwd(inx)\r}
eof {return}
}
puts "minicom done"
'
alias c1='/usr/sbin/pppd -d -detach defaultroute /dev/ttyS2 115200 &'
alias c2='ifconfig; route'
c1
ping 200.240.18.4
route del 200.240.18.4
print -l 5406880 512688{0,1,2,3,4,9} 512689{0,1,2,6,7,8,9} 512690{4,5,6} > ~/o
# (find-fline "~/o")
#####
#
# An alternative for expect_isp (that allows several ISPs)
# 2000jan03
#
#####
# «expect_isp_2» (to ".expect_isp_2")
#*
function ppp-up_ () {
expect -c '
source $env(HOME)/.passwds.tcl
# Create a proc for each telephone number
foreach n {00 01 02 03 04 05 06 08 09 10 11 12 13 14 15 16} \
phone {5406880 5126880 5126881 5126882 5126883 5126884 5126889
5126890 5126891 5126892 5126896 5126897 5126898 5126899
5126904 5126905 5126906} {
proc d$n {} " global USER PWD passwd ISP
set USER edrx; set PWD $passwd(inx); set ISP inx;
send atdt//$phone\\r
"
}
proc ig {} { global USER PWD ISP
set USER ig; set PWD ig; set ISP ig; send atdt//15002000\r
}
set ok 0; spawn minicom; stty -icanon
interact {
~d00 d00 ~d01 d01 ~d01 d02 ~d03 d03 ~d04 d04 ~d05 d05 ~d06 d06
~d07 d07 ~d08 d08 ~d09 d09 ~d10 d10 ~d11 d11 ~d12 d12 ~d13 d13
~d14 d14 ~d15 d15 ~d16 d16 ~i ig
~r {send atx3l0\r}
~u {send $USER\r}
~p {send $PWD\r}
"~\r" {send \001q\r}
-o rname: {send $USER\r}
ogin: {send $USER\r}
ssword: {send $PWD\r; set ok $ISP}
eof return
}
exec echo $ok > /tmp/ppp-up-status
puts "minicom done"
'
}
# (find-es "bash" "case")
function ppp-up () {
ppp-up_
case $(</tmp/ppp-up-status) in
inx) rm /etc/resolv.conf
/usr/sbin/pppd -detach usepeerdns defaultroute /dev/modem 115200 & ;;
ig) rm /etc/resolv.conf
/usr/sbin/pppd user ig remotename ig \
-detach usepeerdns defaultroute /dev/ttyS2 115200 & ;;
*) echo Not trying to run pppd.
esac
}
#*
#####
#
# ppp on potato, with "usepeerdns"
#
#####
# «ppp_usepeerdns»
# (find-status "ppp")
# (find-vldifile "ppp.list")
# (find-fline "/usr/doc/ppp/")
# (find-fline "/usr/doc/ppp/README.linux.gz" "usepeerdns")
# (find-fline "/etc/ppp/")
# (find-fline "/etc/ppp/options" "auth\n")
pdsc $SDEBIAN/dists/potato/main/source/base/ppp_2.3.11-1.1.dsc
# (find-fline "/usr/src/ppp-2.3.11/README.linux" "usepeerdns")
-detach
#####
#
# on PCI modems
# 2000nov25
#
#####
# (find-fline "~edrx/tmp/")
# (find-fline "~edrx/tmp/linux568.zip")
#####
#
# motorola 56k
# 2001feb11
#
#####
# «motorola_56k» (to ".motorola_56k")
# (find-k22file "include/asm-i386/serial.h" "ttyS2")
# { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */
# (find-k22file "drivers/char/")
# (find-k22file "drivers/char/serial.c" "at 0x%04x (irq = %d) is a %s")
# (find-fline "~/bin/als-up")
# (find-fline "/etc/modules")
#*
dmesg | grep tty
#*
# (find-status "setserial")
# (find-vldifile "setserial.list")
# (find-fline "/usr/doc/setserial/")
find /etc/init.d/ /etc/rc* | grep setserial
# (find-fline "/etc/init.d/setserial")
# (find-fline "/etc/init.d/setserial" "Loading the saved-state")
# (find-fline "/etc/rcS.d" "setserial")
# (find-fline "/etc/serial.conf")
#*
/etc/init.d/setserial stop
rmmod serial
insmod serial
/etc/init.d/setserial start
#*
cat > /tmp/pnp <<'%%%'
(DEBUG)
(READPORT 0x020b)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
# (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
(CONFLICT)
(CONFIGURE WIN5602/-1 (LD 0
(ACT N)
# (IO 0 (SIZE 16) (BASE 0x02e8) (CHECK))
(IO 0 (SIZE 16) (BASE 0x03e8))
# (IO 0 (SIZE 16) (BASE 0x02e8))
(INT 0 (IRQ 4 (MODE +E)))
(NAME "WIN5602/-1[0]{WIN5602 MODEM LINE INTERFACE CARD.}")
(ACT Y)
))
(WAITFORKEY)
%%%
isapnp /tmp/pnp
#*
cat > /tmp/pnp <<'%%%'
(DEBUG)
(READPORT 0x020b)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFIGURE WIN5602/-1 (LD 0
# (ACT N)
(IO 0 (PEEK))
(INT 0 (PEEK))
# (NAME "WIN5602/-1[0]{WIN5602 MODEM LINE INTERFACE CARD.}")
# (ACT Y)
))
(WAITFORKEY)
%%%
isapnp /tmp/pnp
#*
# setserial /dev/ttyS2 irq 4 port 0x230 uart 16550A
setserial /dev/ttyS2 irq 4 port 0x3e8 uart 16550A
setserial -g /dev/ttyS[012]
cat > $EEG <<'---'
atz
~
---
modem_interact /dev/ttyS2 20 eeg
#*
pdsc $SDEBIAN/dists/potato/main/source/base/isapnptools_1.21-2.dsc
cd /usr/src/isapnptools-1.21/
# (code-c-d "isapnp" "/usr/src/isapnptools-1.21/")
#*
# (find-status "isapnptools")
# (find-vldifile "isapnptools.list")
# (find-fline "/usr/doc/isapnptools/")
# (find-fline "/usr/doc/isapnptools/isapnpfaq.txt.gz")
# (find-fline "/usr/doc/isapnptools/isapnpfaq.txt.gz" "attempted to CHECK")
# (find-fline "/usr/doc/isapnptools/README.gz" "PEEK")
# (eeman "8 isapnp")
# (eeman "5 isapnp.conf")
# (find-htetfile "Modem-HOWTO.txt.gz")
# Ctrl-alt-dels mentioned "isapnp -rc"; is it a woody/sid option?
#####
#
# wvdial
# 2001feb11
#
#####
# «wvdial» (to ".wvdial")
# (find-status "wvdial")
# (find-vldifile "wvdial.list")
# (find-vldifile "wvdial.postrm")
# (find-fline "/usr/doc/wvdial/")
# (find-angg ".zshrc" "ppp-up")
# (find-fline "/etc/wvdial.conf")
# (find-man "1 wvdial")
# (find-man "1 wvdialconf")
# (find-man "5 wvdial.conf")
# (find-fline "/etc/ppp/peers/")
# (find-angg ".zshrc" "inx-up")
# (find-vldifile "wvdial.postinst")
# (find-fline "/etc/ppp/pap-secrets" "inx")
# (find-fline "/etc/wvdial.conf")
# (find-man "8 pppd")
# (find-man "8 pppd" " remotename name")
# (find-man "8 pppd" " name name")
#*
rm -v /etc/wvdial.conf
cat > $EEG <<'---'
y
15000450
[email protected]
third-field
third-field
y
---
eeg /var/lib/dpkg/info/wvdial.postinst configure
#*
# (find-man "5 wvdial.conf")
# (find-fline "/etc/wvdial.conf")
[Dialer Defaults]
(...)
Init3 = ATL0 &U11
[Dialer shh]
Init4 = ATM0
#*
pdsc $SDEBIAN/dists/potato/main/source/comm/wvdial_1.41.dsc
cd /usr/src/wvdial-1.41/
#*
# (code-c-d "wvdial" "/usr/src/wvdial-1.41/")
# (find-wvdialfile "")
# (find-wvdialfile "wvdial/")
# (find-wvdialfile "wvdial/wvdialer.cc" "// FCLASS")
# (find-wvdialfile "wvdial/wvmodemscan.cc" "+FCLASS=0")
# How can I configure wvdial to use pulse dialing?
# How can I make it use two different ISPs, one of them with several
# phone lines?
#####
#
# efax
# 2001nov10
#
#####
# «efax» (to ".efax")
# (find-status "efax")
# (find-vldifile "efax.list")
# (find-fline "/usr/doc/efax/")
# (find-fline "/usr/bin/fax")
# (find-fline "/usr/bin/fax" "FAXDIR")
# (find-fline "/etc/efax.rc")
# (find-fline "/etc/efax.rc" "sportster")
# (find-fline "/etc/efax.rc" "Commands to set up modem")
# (find-fline "/etc/efax.rc" "VOICEINIT")
# (find-man "1 fax")
# (find-man "1 fax" "The fax answer command is")
# (find-man "1 efax")
# (find-es "modem" "modem_interact")
#*
modem_interact '' '' echo
modem_interact /dev/modem 5 echo
cat > $EEG <<'---'
atz
~
---
modem_interact /dev/modem 5 eeg
#*
lsof | grep /dev/ | awk '{printf "%-12s %-11s %s\n", $8, $1, $2}' | sort \
| uniq | l -S
#*
#####
#
# PPP coonection to Internexus
# 2003feb27
#
#####
# «ppp-inx-feb2003» (to ".ppp-inx-feb2003")
# (find-angg ".zshrc" "inx-up")
# (find-htetfile "PPP-HOWTO.gz")
# (find-htetfile "PPP-HOWTO.gz" "Chapter 16. If your PPP server uses PAP")
# (find-htetfile "PPP-HOWTO.gz" "name <your ISP user name>")
# (find-htetfile "PPP-HOWTO.gz" "16.2. The PAP/CHAP secrets file")
# (find-htetfile "PPP-HOWTO.gz" "Secrets for authentication using PAP")
# (find-htetfile "PPP-HOWTO.gz" "fred pppserver1 barney")
# (find-fline "/etc/ppp/pap-secrets" "inx")
# [email protected] inx my-password-at-inx
# (find-angg ".zshrc" "ppp-up" "function inx-up_")
#*
function inx-up__ () {
/usr/sbin/pppd -detach usepeerdns defaultroute /dev/modem 115200 \
name [email protected] remotename inx &
# while debugging add "debug show-password"
}
cat > $EEG <<'%%%'
atx3l0
atdt//15000450
%%%
eeg minicom; rm /etc/resolv.conf; inx-up__
#*
# (ee-isearch "ppp")
# (progn (find-fline "/var/log/messages") (goto-char (point-max)))
# (progn (find-fline "/var/log/syslog") (goto-char (point-max)))
# (find-vldifile "ppp.list" "pap-secrets")
# (find-vldifile "ppp.postinst" "install /etc/ppp/pap-secrets")
# (find-angg ".zshrc")
# (find-man "8 pppd")
# (find-man "8 pppd" " call name")
# (find-man "8 pppd" " name name")
# (find-man "8 pppd" " remotename name")
# (find-man "8 pppd" " debug")
# (find-man "8 pppd" " show-password")
#####
#
# wvdial.conf's sticky bit
# 2004apr09
#
#####
# «stickybit» (to ".stickybit")
# (find-fline "/etc/" "wvdial.conf")
# (find-angg ".zshrc" "showperms")
showperms /etc/wvdial.conf
# (find-man "2 stat" "001000 ")
# (find-man "2 stat" "001000 " "001000 ")
Pgrep m/fax/i
Pgrep m/fax/i | grep Package:
addressbook
lg-issue25
lg-issue28
mgetty
mgetty-fax
mgetty-viewfax
blinkd
efax
hylafax-client
hylafax-doc
hylafax-server
tkhylafax
xli
efax
qpage
apti lg-issue25 lg-issue28
apti efax
# (find-vldifile "" "efax")
# (find-vldifile "efax.list")
# (find-fline "/usr/doc/efax/")
# (find-vldifile "lg-issue25.list")
# (find-fline "/usr/doc/lg-issue25/")
# (find-vldifile "lg-issue28.list")
# (find-fline "/usr/doc/lg-issue28/")
# (find-fline "~/bin/inx.dip")
port ttyS2
speed 115200
init ATL3&A3&B1&H1&R2&S0=0X3
dial T///5406880
if $errlvl > 1 goto error
wait rname: 10
send edrx\r
wait ord: 10
send xxxxxxxx\n
wait PPP
default
mode PPP
exit
error:
print Failed.
exit
modem.002 'at$' 'at&$' 'ats$' | tr -d \\r | grep -v 'Strike a key' > ~/o
# (find-fline "~/o")
strace -f -o ~/s minicom
l ~/s
#####
#
# Configuring ADSL
# 2007aug27
#
#####
# «pppoe» (to ".pppoe")
# «pppoeconf» (to ".pppoeconf")
# (find-zsh "grep-available -i adsl")
# (find-status "pppoeconf")
# (find-vldifile "pppoeconf.list")
# (find-udfile "pppoeconf/")
# (find-fline "/usr/sbin/pppoeconf")
# (find-fline "/usr/sbin/pppoeconf" "'noauth'")
sudo pppoeconf
* (eepitch-shell)
sudo ifconfig
sudo poff
sudo pon dsl-provider
sudo plog
sudo ifconfig
sudo ifconfig ppp0
sudo poff
#####
#
# serial-usb (for Dado Sutter)
# 2008dec07
#
#####
# «serial-usb» (to ".serial-usb")
# (find-fline "~/LOGS/2008dec07.forth")
# http://netbsd.gw.com/cgi-bin/man-cgi?ucom+4+NetBSD-current
# http://en.wikipedia.org/wiki/Minicom
# http://cutecom.sourceforge.net/
# http://www.google.com/search?q=ttyusb+linux
# http://www.google.com/search?q=serial-usb+linux
# (find-fline "/dev/MAKEDEV" "makedev ttyUSB$i")
# (find-angg ".zshrc" "MAKEDEV_create")
# http://www.eluaproject.net/
# (find-fline "/proc/")
# (find-sh "cat /proc/devices")
# (find-sh "dmesg")
# (find-status "usbutils")
# (find-vldifile "usbutils.list")
# (find-udfile "usbutils/")
# (find-man "1 lsusb")
# (find-man "8 lsusb")
# (find-man "8 update-usbids")
# (find-man "1 usbmodules")
# (find-man "8 usbmodules")
# (find-fline "/var/lib/usbutils/usb.ids")
# (find-fline "/proc/bus/usb/")
# (find-fline "/proc/bus/usb/devices")
# (find-eev "anim/channels.anim")
# (find-eev "eegchannel")
# (find-expcommand "stty")
# Local Variables:
# coding: utf-8-unix
# End: